{"product_id":"bambu-lab-x2d-3d-printer","title":"Bambu Lab X2D 3D Printer","description":"\u003cp\u003eXcellence made simple. The Bambu Lab X2D is an affordable dual-nozzle 3D printer — the main nozzle prints the part, the auxiliary nozzle handles the support, so you stop overthinking support and start peeling it off clean.\u003c\/p\u003e\n\u003cp\u003eDual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste. Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Nozzle 3D Printing:\u003c\/strong\u003e Multi-material made simple. The main nozzle prints the part; the auxiliary nozzle handles the support with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean. Left and right hotends are identical and interchangeable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaster Multi-Color Printing \u0026amp; Cleaner Support Removal:\u003c\/strong\u003e Up to 25-color printing with the maximum AMS configuration (single hotend: up to 4 AMS 2 Pro and 8 AMS HT, 12 units, 24 slots).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 °C Nozzle \u0026amp; 65 °C Active Chamber Heating:\u003c\/strong\u003e Hot enough for the majority of engineering filaments like ABS, ASA, and nylon. Active chamber heating distributes heat evenly, so layers bond strongly from edge to edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed-Loop Servo Motor Extruder:\u003c\/strong\u003e The PMSM servo system (main extruder only) samples resistance and position at 20 kHz and adjusts electromagnetic torque on the fly, smoothing out micro-fluctuations before they reach the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Filament Path AI Detection:\u003c\/strong\u003e AI Liveview Camera and Toolhead Camera scan the build plate before printing and watch for spaghetti, nozzle clumping, and purge-chute jams in real time, pausing the job before it wastes hours of filament.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdaptive Calibration:\u003c\/strong\u003e Flow Dynamics Calibration builds a time-varying, nonlinear model of your extrusion system and compensates for residue, nozzle wear, and damp filament. (Applies to the main nozzle only.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Intake Cooling:\u003c\/strong\u003e Two intakes flush the chamber with cool air from left and right, stabilizing each layer. Overhangs stay sharp and bridges stay clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31 Sensors:\u003c\/strong\u003e Monitoring the feeding path, printing process, thermal environment, and machine safety in real time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean Air, Always:\u003c\/strong\u003e Three-stage filtration (G3 pre-filter, H12 HEPA filter, coconut-shell activated carbon). UL 2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Nozzle Swap:\u003c\/strong\u003e Swap nozzles in seconds, no tools needed. High-flow hotends are supported and can cut print time by up to 30% vs standard nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet Enough for Overnight Prints:\u003c\/strong\u003e Active Motor Noise Canceling and a noise-optimized air duct keep X2D below 50 dB under typical conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne Million Switches. Still Smooth:\u003c\/strong\u003e The dual-nozzle system completed over 1,000,000 switch cycles in life-cycle testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eX2D:\u003c\/strong\u003e Bambu Lab X2D, Textured PEI Build Plate, External Exhaust Fan Bundle, Accessory Box, Spool Holder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eX2D AMS Combo:\u003c\/strong\u003e Everything in X2D, plus AMS 2 Pro for multicolor printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eX2D Print More Bundle:\u003c\/strong\u003e Everything in the X2D AMS Combo, plus a second AMS 2 Pro and a filament track switch — 8 slots total.\u003c\/p\u003e\n\u003cp\u003eNote: To connect more than two AMS units (including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed. The X2D does not support the AMS Hub.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting Technology: Fused Deposition Modeling\u003c\/li\u003e\n\u003cli\u003eBuild Volume: Main Nozzle 256 × 256 × 260 mm; Auxiliary \/ Dual Nozzle 235.5 × 256 × 256 mm\u003c\/li\u003e\n\u003cli\u003eChassis: Plastic and Steel; Outer Frame: Plastic, Glass, and Metal\u003c\/li\u003e\n\u003cli\u003eMaximum Toolhead Speed: 1000 mm\/s; Maximum Acceleration: 20,000 mm\/s²\u003c\/li\u003e\n\u003cli\u003eMaximum Nozzle Temperature: 300 °C; Maximum Chamber Temperature: 65 °C; Maximum Heatbed Temperature: 120 °C\u003c\/li\u003e\n\u003cli\u003eFilament Diameter: 1.75 mm; Supported (main nozzle): PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA\/PETG, Support for ABS, Support for PA\/PET\u003c\/li\u003e\n\u003cli\u003eNozzle: Hardened Steel, 0.4 mm included; Supported: 0.2, 0.4, 0.6, 0.8 mm; Built-in filament cutter\u003c\/li\u003e\n\u003cli\u003eBuild Plate: Textured PEI, Smooth PEI, Cool Plate SuperTack, Engineering Plate\u003c\/li\u003e\n\u003cli\u003eMax Flow: Standard 40 mm³\/s, High Flow (optional) 65 mm³\/s\u003c\/li\u003e\n\u003cli\u003eCameras: Live View Camera 1920 × 1080, Toolhead Camera 1600 × 1200\u003c\/li\u003e\n\u003cli\u003eDisplay: 5\" Touchscreen (1280 × 720); Storage: Built-in 8 GB EMMC and USB Port\u003c\/li\u003e\n\u003cli\u003eConnectivity: Dual-Band Wi-Fi; No Ethernet\u003c\/li\u003e\n\u003cli\u003eSoftware: Bambu Studio (supports third-party slicers exporting standard G-code)\u003c\/li\u003e\n\u003cli\u003ePrinter Size: 392 × 406 × 478 mm; Net Weight: 16.25 kg\u003c\/li\u003e\n\u003cli\u003ePower: 100–120 VAC, 50\/60 Hz; Max Power 1100 W @110 V\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Bambu Lab","offers":[{"title":"X2D","offer_id":68193494761768,"sku":null,"price":589.0,"currency_code":"USD","in_stock":true},{"title":"X2D AMS Combo","offer_id":68193494925608,"sku":null,"price":789.0,"currency_code":"USD","in_stock":true},{"title":"X2D Print More Bundle","offer_id":68193494958376,"sku":null,"price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8464\/1576\/files\/X2DC.jpg?v=1794666220","url":"https:\/\/bumpabuilt.com\/products\/bambu-lab-x2d-3d-printer","provider":"Bumpa Built","version":"1.0","type":"link"}