Bambu Lab
Bambu Lab X2D 3D Printer
Bambu Lab X2D 3D Printer
Xcellence made simple. The Bambu Lab X2D is an affordable dual-nozzle 3D printer — the main nozzle prints the part, the auxiliary nozzle handles the support, so you stop overthinking support and start peeling it off clean.
Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste. Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Key Features
- Dual-Nozzle 3D Printing: Multi-material made simple. The main nozzle prints the part; the auxiliary nozzle handles the support with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean. Left and right hotends are identical and interchangeable.
- Faster Multi-Color Printing & Cleaner Support Removal: Up to 25-color printing with the maximum AMS configuration (single hotend: up to 4 AMS 2 Pro and 8 AMS HT, 12 units, 24 slots).
- 300 °C Nozzle & 65 °C Active Chamber Heating: Hot enough for the majority of engineering filaments like ABS, ASA, and nylon. Active chamber heating distributes heat evenly, so layers bond strongly from edge to edge.
- Closed-Loop Servo Motor Extruder: The PMSM servo system (main extruder only) samples resistance and position at 20 kHz and adjusts electromagnetic torque on the fly, smoothing out micro-fluctuations before they reach the surface.
- Full Filament Path AI Detection: AI Liveview Camera and Toolhead Camera scan the build plate before printing and watch for spaghetti, nozzle clumping, and purge-chute jams in real time, pausing the job before it wastes hours of filament.
- Adaptive Calibration: Flow Dynamics Calibration builds a time-varying, nonlinear model of your extrusion system and compensates for residue, nozzle wear, and damp filament. (Applies to the main nozzle only.)
- Dual-Intake Cooling: Two intakes flush the chamber with cool air from left and right, stabilizing each layer. Overhangs stay sharp and bridges stay clean.
- 31 Sensors: Monitoring the feeding path, printing process, thermal environment, and machine safety in real time.
- Clean Air, Always: Three-stage filtration (G3 pre-filter, H12 HEPA filter, coconut-shell activated carbon). UL 2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic.
- Tool-Free Nozzle Swap: Swap nozzles in seconds, no tools needed. High-flow hotends are supported and can cut print time by up to 30% vs standard nozzles.
- Quiet Enough for Overnight Prints: Active Motor Noise Canceling and a noise-optimized air duct keep X2D below 50 dB under typical conditions.
- One Million Switches. Still Smooth: The dual-nozzle system completed over 1,000,000 switch cycles in life-cycle testing.
What's in the Box
X2D: Bambu Lab X2D, Textured PEI Build Plate, External Exhaust Fan Bundle, Accessory Box, Spool Holder.
X2D AMS Combo: Everything in X2D, plus AMS 2 Pro for multicolor printing.
X2D Print More Bundle: Everything in the X2D AMS Combo, plus a second AMS 2 Pro and a filament track switch — 8 slots total.
Note: To connect more than two AMS units (including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed. The X2D does not support the AMS Hub.
Specifications
- Printing Technology: Fused Deposition Modeling
- Build Volume: Main Nozzle 256 × 256 × 260 mm; Auxiliary / Dual Nozzle 235.5 × 256 × 256 mm
- Chassis: Plastic and Steel; Outer Frame: Plastic, Glass, and Metal
- Maximum Toolhead Speed: 1000 mm/s; Maximum Acceleration: 20,000 mm/s²
- Maximum Nozzle Temperature: 300 °C; Maximum Chamber Temperature: 65 °C; Maximum Heatbed Temperature: 120 °C
- Filament Diameter: 1.75 mm; Supported (main nozzle): PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET
- Nozzle: Hardened Steel, 0.4 mm included; Supported: 0.2, 0.4, 0.6, 0.8 mm; Built-in filament cutter
- Build Plate: Textured PEI, Smooth PEI, Cool Plate SuperTack, Engineering Plate
- Max Flow: Standard 40 mm³/s, High Flow (optional) 65 mm³/s
- Cameras: Live View Camera 1920 × 1080, Toolhead Camera 1600 × 1200
- Display: 5" Touchscreen (1280 × 720); Storage: Built-in 8 GB EMMC and USB Port
- Connectivity: Dual-Band Wi-Fi; No Ethernet
- Software: Bambu Studio (supports third-party slicers exporting standard G-code)
- Printer Size: 392 × 406 × 478 mm; Net Weight: 16.25 kg
- Power: 100–120 VAC, 50/60 Hz; Max Power 1100 W @110 V
Couldn't load pickup availability
Share
